CALIBRATION TUBES Manufactured by Brawoliner ® In Pipe Restorations using the Versa-Patch system, the calibration tube protects your packer from over-inflation at connections, breaks or when any part of the packer is out of the pipe. Ensures uniform size and expansion of liner material and serves as the conduit for circulating hot water used to cure the liner. Available as part of the Versa Containment Kits or sold by the roll for lining or patching.

Picote Coating/Cleaning Brush 8-inch for 6-inch Pipe -- Mini Pump (1/2-inch Shaft) Custom designed, high-quality and long lasting brush with nylon bristles for brush coating and cleaning PVC pipes. Clean with acetone and reuse.

Brawoliner Manufactured by Brawoliner ® Seamless flexible textile liners for the rehabilitation of small diameter pipes with bends of up to 90 ° and up to two changes in dimension. Lasts over 50 years, offering an economic and environmentally-friendly alternative to open construction work.

Brawoliner Manufactured by Brawoliner ® Seamless flexible textile liners for the rehabilitation of small diameter pipes with bends of up to 90 ° and up to two changes in dimension. Lasts over 50 years, offering an economic and environmentally-friendly alternative to open construction work.

Brawoliner Manufactured by Brawoliner ® Seamless flexible textile liners for the rehabilitation of small diameter pipes with bends of up to 90 ° and up to two changes in dimension. Lasts over 50 years, offering an economic and environmentally-friendly alternative to open construction work.

Available only to Roto-Rooter

Flex Adapter Manufactured by APS ® Flexible adapter designed to create and maintain a secure air connection between the packer and push rods even through extreme bends.

3" to 4" x 7' Green Multi-bend Packer. Specially designed to install point repairs in a variety of scenarios including multiple sizes of straight pipe, 90-degree bends, p-traps and even bends combined with diameter changes in a single patch. The ability to be pushed or pulled into place through several 90-degree bends as well as rotated with locking push rods makes this the most versatile packer on the market. A packer is an inflatable bladder that is wrapped in resin-soaked patch of liner that is either pushed or pulled into the host pipe to the target area and inflated until the resin on the liner has fully cured. The packer is then deflated and removed from the pipe, leaving a fully structural section of liner.

3" to 4" x 4' Green Multi-bend Packer. Specially designed to install point repairs in a variety of scenarios including multiple sizes of straight pipe, 90-degree bends, p-traps and even bends combined with diameter changes in a single patch. The ability to be pushed or pulled into place through several 90-degree bends as well as rotated with locking push rods makes this the most versatile packer on the market. A packer is an inflatable bladder that is wrapped in resin-soaked patch of liner that is either pushed or pulled into the host pipe to the target area and inflated until the resin on the liner has fully cured. The packer is then deflated and removed from the pipe, leaving a fully structural section of liner.

Push Rod Manufactured by APS ® Built to last and perform, these lockable and ultra-flexible 5 Â Push Rods allow you to rotate the packer and ensure that what goes in the pipe will always come out. No more fear of bumping your air fittings through bends or accidentally disconnecting.

Available only to Roto-Rooter. Roto-Rooter branded Picote Mini Miller with Accessories kit.

4" to 6" x 7' Yellow Multi-bend Packer. Specially designed to install point repairs in a variety of scenarios including multiple sizes of straight pipe, 90-degree bends, p-traps and even bends combined with diameter changes in a single patch. The ability to be pushed or pulled into place through several 90-degree bends as well as rotated with locking push rods makes this the most versatile packer on the market. A packer is an inflatable bladder that is wrapped in resin-soaked patch of liner that is either pushed or pulled into the host pipe to the target area and inflated until the resin on the liner has fully cured. The packer is then deflated and removed from the pipe, leaving a fully structural section of liner.